|
Euronda E9 Inspection® is the latest generation autoclave, which manages all “B” - type cycles
in full compliance with EN 13060.
Process Controller
The Process Controller is a real
assistant that evaluates the process by constantly controlling the
temperature, pressure and time parameters during all the phases
of
the selected program.
A clear advantage comes out: a real interface
between machine and user is achieved.
Inspection Tanks Group
The top of the E9 Inspection® has been designed in an innovative way in order
to place the clean and used water tanks in a manner which allows the complete
inspectionability of the interiors.
The constant search for innovative solutions
has found that periods of stagnation, both of clean water and of used water,
especially during long periods of inactivity of the unit, constitute a potential
danger for
the correct operation of the machine.
The advantage of providing a solution that allows for maximum cleanliness and
through hygiene
of the E9 Inspection® thanks is,
therefore, highly innovative
and far-sighted.
|
Water Outgas System
This device contains the process water before it enters into the steam generator
and then in the form
of steam in the chamber.
Its particular method of operation
limits the presence of incondensable gases in the water used
and guarantees a
higher quality of steam and therefore
more reliable sterilisation. |